The O-Gee Stramit gutter can be cut to length and is available in-stock in 6.0m lengths. The statements, information, and opinions quoted are provided by the featured supplier. Each of these combinations will lead to premature corrosion. Gutter fall, ensuring sufficient fall in the direction of the downpipes. Specific data for any location can be obtained from the Australian Bureau of Meteorology. Drainage from copper or lead products (including roof flashings) should not be allowed to discharge on to zinc/aluminium or aluminium/zinc/magnesium alloy or COLORBOND steel components. Copyright Fielders 2022. The slotted Old Gothic face adds character and style to your building line. Available in a range of COLORBOND steel colours and finishes. All colours & finishes may not be available in all regions or for all profiles. The ongoing research and development activity ensure we remain at the forefront of innovation, design and consumer information. All rights reserved. Please check with your local Stramit office or Product and Service Guide for a schedule of availability. It has a streamlined appearance with no external brackets and can be easily mitred. Fielders are proud to now operate the largest press brake machine in the Southern Hemisphere. The position of the gutter in relation to the fascia. Standard SteelCOLORBOND Paperbark In all Australian states except Western Australia, determining the maximum sloped roof run length involves taking into account the additional length of roof which contributes to the flow in any one position when there is a roof penetration or spreader. Stramit's rainwater products can be easily cut, where required, using a fine-toothed hacksaw and tin snips. For internal/box gutters and overflow design use the 100 year ARI values included in the tables. Standard SteelCOLORBOND Shale Grey These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. Material shall be protected steel sheet to Australian Standard AS1397 with a minimum yield stress of 300MPa and an AM100/AZ150 coating with an oven-baked paint film of selected colour, or a plain AM125/AZ150 coating. FieldersSlimFlor utilises Fielders SlimDek 210 flooring profile in conjunction with Asymmetric Steel Beam Sections (ASB) to provide a floor system with a reduced construction zone. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours. STRATCO also designed equipment for gasoline alkylation since the process was developed in 1938, becoming the #1 provider of alkylation systems in the world through 2003. The link will expire in 30 days. This is an award winning system. Hi Back Ogee gutter gives your home a colonial style finish that is popular with heritage style buildings. Minimum length of 800mm. Stratco Gutters are designed to minimise the risk from serious water damage to the building, making Stratco Guttering a wise investment. Use only neutral-cure silicone for sealing joints when using Stramit's rainwater products. To complement Fielders unique steel roofing & building products, Fielders offer a comprehensive range of Fascia Gutters to suit their gutter profiles and sizes. Manufactured Return stop ends are made from a continuous length of gutter and supplied ready to install on site. I've always said you need to cover at least the 3 basics. STRATCO are third-party specialists with navigating all NYS incentive programs. This website uses cookies to improve your experience. Individual stop ends can be supplied in left and right hand ready for on site installation. Similarly, only use specified Stramit accessories when connecting a Stramit O-Gee Gutter to Stramit Fascia. It's been designed for installation directly to roof rafters without the use of timber fascia. These include University of Technology, Sydney; James Cook University Cyclone Testing Station; The University of Sydney; and CSIRO. 1. The Roof Run Length tables give the maximum sloped roof run length which can be used for the overflow through the slots, and back of gutter. Fielders KingFlor KF40 SquashCut is a revolutionary steel formwork product highly suitable for all types of concrete slab construction. Installation of the specified gutter and downpipes, and ensuring that downpipes are installed in the correct locations and numbers. EA. STRATCO, Inc. Industrial Machinery Manufacturing Scottsdale, Arizona 173 followers Leading global provider of specialized blending and reaction equipment for petrochemical production. Fascia guttering can be easily mitred. For all your home renovations and projects. A weathering period of two weeks following installation will make painting easier. Check availability and lead times with your, Proudly supporting local WA football talent, The Montessori Learning Project: A True Customer Leading Example, Welcoming the latest addition to Stramit's Architectural Range, Announcing our new, revamped claims process, Stramit proud to be a NATSPEC Product Partner, New Accredited Training Course for Shed Builders, Stramit launches Commercial Eaves Gutter Solution in South East Queensland, Stramits digital self-service Customer Portal arrives at critical time for building product sector, Stramit team helps Tanzania church become a reality, WA customers: Changes to 0.40 BMT Custom Flashing Offer, Stramit CapacityPLUS 660 has Visy warehouse covered, Award-winning community education and disaster centre uses Stramit for structure, Changes to Stramit roll formed Barge Gutter, Stramit 2020 Product and Service Guide out now, Stramit 2020 Holiday Dates and Milestones, Discontinuation of 45 degree accessories from 30 October 2020, Stramit helps deliver Queenslands first mega cruise ship terminal, NEW Taurean PA Doors now available nationwide, Celebrating 50 years of service with Milton of Taurean Door Systems, IHG National Conference prize draw winner, Stramit Astragal profiles modified from 30 March 2020, Stand out with Stramit's Sharpline Architectural Cladding, Stramit proud to support Victorians in need, 2019 Big VIC Trade Expo prize draw winner, New Stramit webinar series launches this September, Stramit supports apprenticeship training programs, Asahi Beverages facility up and running for business, Stramit launches CapacityPLUS660 in New South Wales, Brisbanes heritage-listed cathedral restored to former glorye-listed cathedral restored to former g, Award-winning stable showcases steely form and elegance, Stramit Longspan plays key role in Tobruk Memorial Pool redevelopment, Stramit purlins create helix effect on new science building, Stramits steel building products revitalise aged care home, Stramit steel building products bring dream home design to life, Heritage design suitable for the older-style house, gutter size/capacity, falls and outlets (sumps, rainwater heads, nozzles). Pete Z. said: I usually don't write reviews unless something really get my attention,, Eric J. said: Called to get an estimate to replace my water heater that was over 20, L. C. said: Wow. The Fielders Hi-Tensile Guttering System is suitable for a wide range of projects, from new home construction through to restorations of traditional buildings. The Stramit O-Gee Gutter is produced to suit local traditional shapes across Australia so products vary to suit the location. Available Colours: To complement the extensive range of Fielders steel roofing and building products, Fielders offer a similarly comprehensive range of quality gutter profiles in various designs and sizes to suit the specific requirements in each state of Australia. Clean the rainwater product immediately prior to painting. The Stramit O-Gee Gutter coated with Zinc-Aluminium / Zinc-Aluminium-Magnesium alloy and COLORBOND steel will give excellent durability in almost all locations more than 200m from a marine environment or in some light industrial applications. To complementthe extensive range of Fielders steel roofing andbuilding products, Fielders offer a similarly comprehensive range of quality gutter profiles in various designs and sizes to suit the specific requirements in each state of Australia. While there may be variations between states, contractors who install guttering systems are generally required to hold an appropriate licence. Stratco offer a wide range of downpipes and spouts for any domestic roofing or commercial application. This gutter profile is especially popular for heritage style buildings. Fielders offer a wide variety of capping, ridges and channels to suit your needs. New double-thickness galvanised roofing. Areas of focus include landlord-tenant mediation, tenant buyout services, litigation management, and due diligence. Fielders KingFlor KF57 offers builders a steel formwork for composite concrete slabs that is light weight and easy to use, making this the perfect solution for concrete and steel framed construction. When fixing to timber fascia, the suspension rib can also be used with timber fix clips. It comes with a full range of accessories including stop ends, mitres and concealed brackets. Choose from a wide range of colours and a huge range of guttering profiles to compliment any architectural style from modern homes to heritage buildings. EA, Black Slot-N-Lock 5 Shelf Unit 1800 x 1200 x 450mm, $89.00 Stratco SKU: OG-Gutter OG Gutter has a traditional, charismatic profile. You bring the dream, we'll bring the How To. Stratco SKU: OG-Big-One-Gutter OG Big One has a clean, stylish, Old Gothic face. Providing information on water overflow; design and installation and maintenance of domestic roof drainage systems; designing a perimeter drainage system for a domestic roof; Lysaght gutters, fascia and accessories; downpipes and accessories; tradework and rainheads; installation advice; and gutter maintenance. The overflow devices should have adequate capacity and the roof drainage system must be in accordance with AS 3500.3. STRATCOs technology and equipment is installed in 60 countries on six continents and has evolved into a one-stop shop for manufacturing processes in a variety of industries, providing engineering services and equipment. It should however be emphasised that the extent and longevity of records in Australia are limited and any such data therefore carries with it a degree of uncertainty. DESIGN, INSTALLATION & TECHNICAL PRODUCT INFORMATIONVisit Lysaght Professionals. Limited | NZBN 94 2904081462 9. Matt SteelCOLORBOND steel Bluegum OGEE Gutter | Ccmetalroofing Phone 02 4322 2377 Home Supply Flashing Rainwater Quadgutter Emline Gutter Trimline Gutter Sheerline Fascia Gutter OGEE Gutter Rance Gutter Half Round & Flat Back Gutter FITFAST Gutter Novaline Fascia Downpipes Roofing Custom Orb Custom Blue Orb Trimdek Spandek KLIP-LOK 406 KLIP-LOK 700 Hi-Strength KLIP-LOK Maxima Complete range of guttering accessories available. Stratco is one of the largest producers and marketers of quality building and home improvement products in Australia with a network of stores throughout the country. Stratco Headquarters: Gepps Cross, South Australia. The combination of vast water capacity, good looks with any style and colour as well as the longevity of the quality Colorbond Steel, Quad Gutter remains one of Fielders most popular guttering profiles. We serve the entire value chain with in-depth services to obtain government incentives for development projects. The ARAMAX structural cladding system meets this criterion perfectly because it is unlike any other. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner. These values are based on independent testing. Gutter overflow needs to be considered when designing and installing gutter systems. They are installed internally at 1.2 metre intervals and are not visible on the external gutter face. Copyright 2019 Stratco (Australia) Pty Limited | ABN 40 007 550 754. 541 were here. Stratco OG or 'Old Gothic' gutter imparts a classic style to both modern and period homes. Bluescope and Lysaght are Trademarks of Bluescope Steel Limited ABN 16 000 011 058. Ogee gutters should only be installed over fascia boards. Product Brochure - Guttering & Steel Fascia. Steeline OGEE Gutter is made from quality Colorbond or Zincalume Steel that is strong and long lasting. Pricing for all our products varies based on availability and quantity. Fielders have undertaken world first testing to study the behaviour of the KingFlor metal deck in post-tensioned concrete slabs. Individual stop ends can be supplied in left and right hand ready for on site installation. They provide a more traditional look and are visible on the external face of the gutter. Overflow design must be based on the 100 year ARI 5 minute duration rainfall intensity. Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building. Our services allow owners to enhance their capital stack and improve their project yields. MagnaFlow Fielders will guarantee the project utilising one of our approved screw-fix products for a period of up to 5 years when installed by a Fielders Approved Contractor. This requirement does not apply where the gutter is connected to a verandah or where the eave is more than 450mm wide, with either no lining or raked with a slope towards the gutter. Standard SteelCOLORBOND steel Southerly The Fielders 150mm Half Round Gutter is suitable for domestic and light industrial buildings and is easy to keep clean as very little debris is left in this gutter due to its shape. SnowIt is common practice not to use gutters in snow prone areas but to take care of roof run-off at ground level. COLORBOND Metallic steel steel boasts an innovative paint technology that producesa unique lustre effect. The Fielders Halfline Gutter provides the benefits and looks of a Half Round Gutter with the added bonus of being fixed with internal brackets. You can be confident that COLORBOND Coolmax steel will assist to maximise the thermal performance of your building. Stramit Gutters require the correct proprietary Stramit brackets (or snap clip/stiffener bracket combination) for support at spacing no greater than those shown in the following table. Standard SteelCOLORBOND Pale Eucalypt They provide a more traditional look and are visible on the external face of the gutter. STRATCO's rent regulatory advisory division is an owner's representative in creating forward-thinking collaborative strategies on NYC's multi-family stock. $10.82 First use a low-gloss water-borne acrylic primer. Complete your roof with quality gutters from Stratco. These mitres provide a continuous line around the corners and can be made to any angle required to suitthe design of the building. $79.00 All fastening screws must conform to AS3566 Class 3. It's therefore worth considering the following maintenance regime: Following a regular and adequate maintenance regime is also a requirement for your warranty. Get a Quote Large Volume Guttering They are installed internally at 1.2 metre intervals and are not visible on the external gutter face. The most common means of satisfying these requirements for roof drainage (i.e. The gutters are wonderful, this new seamless technology makes a single piece as long as you need it, with no joints to leak. Use appropriately-sized gutters set well below the roof edge with a good fall and large downpipes with well angled offsets to avoid corner blockages. Finish your project with a comprehensive range of OG Gutter accessories including mitres, stop ends and brackets. Standard SteelCOLORBOND Dune In our summer storms a big roof area means more water than a conventional eaves gutter can carry. Our process allows you, the manufacturer, to minimize unit manufacturing costs while maintaining high standards of quality. The optional slotted gutter prevents water overflowing back through eaves and into your home during heavy rain or from blockages in your outlets. Necessary cookies are absolutely essential for the website to function properly. As the tried and tested traditional option, Fielders Pierced Fixed roofing profiles are available in a selection of designs and specifications for residential, commercial and industrial applications. I got rain gutters better than I ever imagined. However should painting of Zinc Aluminium / Zinc Aluminium Magnesium coated steel products be required, use the following procedure. Stratco OG Gutter can be ordered in un-painted zinc/al or in a huge range of pre-painted steel colours. Stramit's rainwater products are available in COLORBOND steel colours. Available in a wide range of COLORBOND steel colours. Ultra Steel Product kept in stock is available in 6.0m lengths. The 20 year ARI values should only be used for external eave gutters. Check availability and lead times with yourlocal Stramit officeor refer to theProduct and Service Guidefor your area. LYSAGHT OGEE Gutters are one of the most popular profiles, so there is a complete range of accessories to choose from. Matt Steel Stramit's O-Gee Gutter comes in a range of colours and finishes. The curved front edge of the gutter will offer a distinguishing feature to any home. Mailing AddressSTRATCO, Inc.6501 E Greenway ParkwaySuite 103-612Scottsdale, AZ 85254, Global HeadquartersSTRATCO, Inc.15678 N Greenway-Hayden LoopSuite 103Scottsdale, AZ 85260, STRATCO Small Business Certifications: NAICS Codes: 541330, 333298, 324191. Finish with water-borne acrylic gloss, or your choice of gloss level. Fielders will guarantee the watertightness of a project utilising one of their concealed fix products for a period of up to 20 years when installed by a Fielders Approved Contractor. It is designed for commercial buildings and is capable of carrying large amounts of water. The detailing and sizing of the selected overflow method/s is normally completed by the designer/installer, but must be adequate for the situation and must meet the relevant performance requirements of the NCC and Australian Standards. Different in appearance from traditional gutters with its inverted curved features and slim sharp lines, it is ideal for gutter replacements where you require a different look. Please check with your local Stramit office or Product and Service Guide for a schedule of availability and whether the product can be cut to length. These areas include portions of fascia and the underside of accompanying gutters. STRATCO stands at the leading edge of lubricating grease technologies and is an engineering firm that designs and manufactures equipment for various petrochemical processes and continues with the commitment to research and development improving existing mixing, reacting, and blending technologies. $69.00 Contact your local Stramit office for more information. Stalco Continuous Gutters is Australia's largest manufacturer and supplier of roll formed on site continuous gutters in pre painted Aluminium and Zinc/Aluminium coated steel. Were the only ones who smelt like we did 100 years ago. Standard SteelCOLORBOND Windspray D Gutter is the most widely used steel gutter profile in Australia and is also available in a similar, smaller profile known as '115 Quad Gutter'. Fielders concealed fix roofing profiles are developed to suit a variety of structural applications and to withstand harsh environmental conditions. Stratco OG or 'Old Gothic' gutter imparts a classic style to both modern and period homes. A true classic that suits both modern to traditional designs, 115mm Quad Gutter is a widely adaptable gutter profile. This enables the gutters to be fixed quickly and securely to Stratco Continuous Fascia with the Stratco suspension clip. As an integral part of the KingFlor range, SlimDek 210 promises lower floor depths with the same strength and durability of all KingFlor designs. Contact your local Stramit office or refer to the Stramit Product and Service Guide for your area for further detail. Similarly, lead or copper components should not be installed in contact with zinc/aluminium or aluminium/zinc/magnesium alloy coated steel. External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. Two piece cast angles provide an easy and flexible solution to gutter mitres. HailStramit's rainwater products can resist impact from significantly-sized hail without damage. When he wanted it. Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. Standard SteelCOLORBOND Night Sky The spikes are fixed into the timber fascia, positioned underneath the gutter with the front portion of the bracket wrapping around the face of the gutter. Colorbond and Zincalume are registered trademarks of BlueScope Steel Limited.ZAM is a registered trade mark of Nisshin Steel Co., Ltd. Stramit Corrugated Roof and Wall Cladding, Stramit Curved Corrugated and Bullnose Roof Cladding, Stramit CapacityPLUS 660 Deep Roof Cladding, Stramit Speed Deck Ultra Concealed Fixed Decking, Stramit Speed Deck 500 Concealed Fixed Decking, Stramit Premier 300 Architectural Cladding, Stramit Condeck HP Composite Slab System, Stramit Residential Floor Framing System, Stramit Uniguard Fire Resisting Wall System, Stramit's O-Gee Gutter comes in a range of colours and finishes. Stramit OGee gutter SA is an attractive and practical gutter profile ideally suited to Australian colonial and heritage homes. Consideration should be given to handling and installation issues as part of site induction safety procedures. These cookies do not store any personal information. Materials:Aluminum, Steel, Galv, Bond, and Copper; Water Volume: 1.2 Gal. Explore Range. Stratco is one of the largest producers and marketers of quality building and home improvement products in New Zealand. A simplified method of finding this length is shown in the illustration. Fascia is measured by the depth of the gutter while Ogee is measured from the width of the gutter. Under the Environmental Planning and Assessment Act 1979 and its regulations, all building work must be carried out in accordance with the Building Code of Australia (BCA), now part of the National Construction Code (NCC). 4 reviews of Perla Seamless Rain Gutters & Sheet Metal Products "I am a business man that appreciates good customer service. With appealingribbing details it is great for those who want to make a statement while still being a smart solution for longevity and capacity. Manufactured in Christchurch. In these positions, the effective roof run length would be longer than the distance from the ridge to the eaves. A link to download the selected files has been emailed to . Stratco OG Gutter can be ordered in un-painted zinc/al or in a huge range of pre-painted steel colours. Stratco gutters are strong, yet lightweight making them easy to handle. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building. The use of compatible materials for drainage system components, leaf-guard system components and fasteners/sealants to connect and seal the components. Forward thinking has placed all of Fielders decks in custom-built containers, consequently Fielders can roll all of their concealed fixed roofing profiles throughout Australia, even in the remotest regions and are ready for the world. Stratco is one of the largest producers and marketers of quality building and home improvement products in Australia with a network of stores throughout the country. For these and installations closer to the coastline, please contact your nearest Stramit office for advice. Disclaimer KingFlor Designer 5.4 now includes KingBeam for composite beam design with KingFlor profiles. This category only includes cookies that ensures basic functionalities and security features of the website. Specific consideration should be given to pack handling , avoidance of cuts, trips, slips and falls, long section handling, particularly in windy conditions, section cutting procedures and surface temperature on sunny days. Fielders Quarter Round Gutter is able to be used on rebated fascia as it has a partially flat base Efficient water channelling to the back of the gutter reduces build-up of silt and debris. A member of the Fletcher Building Group.Use of and indicates trade marks of Stramit Corporation Pty Limited. Limited | NZBN 94 2904081462 9. colour names are trademarks of BlueScope Steel Limited. nam nguyen, md; boronia medical centre doctors; stratco ogee gutter Personal Protection Equipment (PPE) should always be used, including cut resistant or leather gloves when handling and transporting product and appropriate footwear when handling long lengths. The statements, information, and opinions quoted are provided by the featured supplier. COLORBOND steel Studio enables you to browse over 200 COLORBOND steel colours. It is available with slots and in a huge range of colours. Standard SteelCOLORBOND Manor Red Drainage from copper, COLORBOND and zinc/aluminium or aluminium/zinc/magnesium alloy coated steel, translucent (or other inert material) should not be allowed to discharge onto, or into, galvanised products. Longline gutter is the perfect compromise between style and function. Stramit manufactures a range of Quad Gutters locally. Available in long lengths for fast and easy installation Compatible with the LYSAGHT NOVALINE Fascia System Fielders offers unique accessories which complement the Fielders rainwater, roofing and walling products to ensure you receive the correct fit, seal and longevity for your project every time. About STRATCO. In addition to referring to Australian Standards AS/NZS 3500.3, and AS/NZS 3500.5, the BCA also contains requirements for the disposal of surface water in Volume One, Performance Requirements FP1.2 and FP 1.3, and in Volume Two, Part 3.5.2, namely, Performance Requirement P2.2.1 and Clauses 3.5.2.1. to 3.5.2.5. The square front is designed to hide the end of roofing and provide a neat face to architecture. THE PROJECT Some gutters are available with slots in the front to reduce the risk of water overflowing at the back. Back flashing, where gutter support brackets allow for installation of back flashing (e.g. Stramit O-Gee Gutter is supplied cut to length at most of our offices. OGEE GUTTER Product Description and Features Finish your roof with the distinctive style of the LYSAGHT OGEE Gutter.